Coagulyzer 1
The new family of semi-automated Coagulyzer instruments are designed for the low volume to mid volume labs. They combine the advantages of mechanical and photo-optical clot detection in the turbodensitometric principle.
For the routine assays PT, APTT and Fibrinogen Analyticon offers a complete system with reagents, controls and calibrators. Further tests can easily be adapted to the coagulation analyzers.
not yet released in US
« back to overview
-
1-measuring channel
-
Controlled at 37.4°C ± 0.4°C
-
1 reagent position
-
4 cuvette positions
-
Editable reagent parameters
-
7 pre-programmed test positions
-
Automated calculation of seconds, INR, %, g/l, mg/dl, Ratio
-
Calibration curves editable up to 9 measuring points
-
Automatic cuvette detection
-
Reagent settings can be loaded/stored via ChipCARD
|
Weight: |
0.7 kg |
|
Dimensions: |
166 mm (W) x 175 mm (D) x 80 mm (H) |
|
Interfaces: |
ChipCARD reader, 1 x RS232C |
|
Test volume: |
Micro cuvette for single use, min. 150 µl - max 300 µl |
|
Options: |
Connection to an external printer, recommended (Seiko Epson DPU-414) |
Can I use other reagents on the Coagulyzer?
Yes, it is an open system. But it is necessary to adapt the reagent. Analyticon provides the analyzers with the settings for our reagents.
Can I re-use the cuvettes?
No, they are for single use only.
Can I use other cuvettes?
No. The systems use Analyticon cuvettes only. This is to ensure the best performance.
What test can be measured on the Coagulyzer‘s?
Available from Analyticon (+ controls):
-
PT
-
APTT
-
Fibrinogen (Clauss method)
Adaptable on the Coagulyzer:
|
All Coagulyzer models |
Coagulyzer 100 only |
-
Thrombin Time
-
Single Factors II, V, VII, VIII, IX, X, XI, XII
-
Protein C (clotting)
-
Protein S (clotting)
-
APCR (clotting)
-
Lupus Anticoagulant
-
Heparin
|
-
PiCT
-
TDT
-
TAFI
-
ATIII
-
D-Dimer
-
CRP
|
More FAQs can be found in our
support area.
